Integration of robots with the EyeVision software

The EyeVision image processing software contains commands that enable communication and control of a universal robot. There is no need for complex programming, as one command is sufficient to send the required tasks to the robot.

The numerous commands of the EyeVision make RobotVision solutions in 2D, 3D or even thermal imaging cameras in combination with a UR robot considerably easier. Tasks such as picking containers can therefore be solved with just a few clicks of the mouse.

 

The integration of a robot works as follows:A component and its specific alignment are taught in. The EyeVision software now recognizes every component that is positioned in the same way and sends the position of the objects to the robot via a UR command. The robot can now locate, grasp and pick up the objects.

 

With the UR command it is also possible to carry out an automatic inspection of the objects in different phases. The EyeVision software then sends the robot the position at which the camera should check next. The robot then moves the sensor to this position, where an image is recorded and then evaluated by the software. This process is very quick as it only takes a few milliseconds.

 

Due to the high compatibility of our EyeVision software, you can use any 3D sensor, color or gray image camera, as well as some thermal and hyperspectral cameras. In addition, the EyeVision UR-support offers you easy access to RobotVision solutions. As a user, you can even choose between using a PC, an embedded or an intelligent camera system for your image processing task.

 

Learn more about the integration of robots with the EyeVision software on our homepage or our YouTube channel!

 

Spread the love

One thought on “Integration of robots with the EyeVision software

Leave a Reply

Your email address will not be published. Required fields are marked *